Centering in Radiology

Centering in radiology is an important step when conducting radiographic examinations. This is the procedure for installing a central beam of radiation at a given point on an object to obtain a high-quality image. Centering allows you to avoid distortion and obtain an accurate picture of the area being examined.

For centering in radiology, special equipment is used, such as X-ray machines and computed tomographs. Installation of the central beam at a given point is carried out using special devices and mechanisms that allow you to accurately direct the radiation to the object.

The centering procedure can be performed either manually or using automated systems. In any case, correct centering is key to obtaining high-quality images and correct diagnosis.

Centering in radiology is essential for many medical procedures, such as diagnosing diseases, performing surgeries, and monitoring treatment. Correctly performed centering provides accurate and informative images, which allows doctors to make the right decisions and prescribe effective treatment.

Centering is a method of positioning the X-ray tube during radiography. Its use helps reduce the likelihood of receiving erroneous diagnostic test results. The centering procedure assumes a strictly horizontal position of the receiver relative to the radiation source and a vertical position of the main beam relative to the object. During the procedure, the following procedure is followed: 1. The receiver is positioned perpendicular to the cassette. At the same time, he must be able to move without difficulty. 2. The X-ray tube is aligned parallel to the base of the receiver. Its position is fixed with a screw. Screws are installed on all products: stand, machine base or console. They also provide detailed instructions for correct alignment. 3. The radiation intensity is adjusted. 4. The distance between the object and the source is set. The tube must be located behind the patient. During the alignment process, tools provided for centering are used, for example, a flange. Specialists usually have a set of such devices to simplify the event. Adjustment table and indicator can be used