How to remove wrinkles in paint

The clone tool is a very useful tool that will not only allow you to duplicate objects in drawings, but also delete objects, remove wrinkles and perform other actions. Let's say we have the following fragment of a photograph and we need to remove part of the stick in front of the horse.

First, let's enlarge the photo to make it easier to work by pressing the keys Ctrl ++, that is, on the key Ctrl and, without releasing it, press the + key.

Now let's click on the duplicate button (). Two circles will appear on the screen.

The bottom circle will contain a plus sign, which indicates that the mouse cursor is located at this location. These two circles indicate that if you left-click the mouse, the background from the top circle will be moved to the bottom circle. Let's click the left mouse button for example.

The background from the upper circle will appear in place of the lower circle. Now click on the left mouse button and, without releasing it, move the cursor to the left. Then release the left mouse button and move the mouse cursor to the right, but a little lower, since in one pass we were not able to remove the stick from the drawing. And again move the mouse cursor to the right without releasing the left mouse button. As a result, part of the stick will be removed.

Now let’s enlarge the picture by pressing the keys Ctrl +-.

Part of the fence has been removed from the picture.

Now let's try to remove the blue pad on the horse's leg. Let's enlarge the photo again.

But, if we change the background, then, as can be seen from the picture, the upper circle is not on the horse’s leg. Therefore, you must first install the upper circumference on the leg. To do this, move the mouse cursor and press the key Ctrl , and without releasing it, click on the left mouse button and release it.

When a key is pressed Ctrl and pressing the left mouse button, one circle will remain on the screen. After we release the key Ctrl and the left mouse button, the circle that you selected will blink and when you move the mouse cursor, a second circle will appear.

Place the second circle at the beginning of the blue area, click on the left mouse button and, without releasing it, move the cursor down, then release the left mouse button. If the blue part appears again, then release the left mouse button and click on it again, without releasing it, move the mouse cursor even lower. We get the following picture.

Let's enlarge the picture by pressing the Ctrl + - keys.

The blue headband will mostly be removed. You can also remove the bandage on the horse's other leg.

In the same way, you can take wrinkles on the face by selecting an area where there are no wrinkles and moving them to a place where they are present.

You can also duplicate objects. Let's put two people on the horse. Let's increase the tool size to 50 points.

Then move the mouse cursor (in the form of a circle) over the rider’s face.

Press the key Ctrl to select the area that we will copy and release it. Then move the mouse cursor (second circle) to the left, where the second horsewoman should be.

Then click on the left mouse button and, without releasing it, move it down.

You can further adjust the drawing by removing breaks in the stick and foliage.

In the mode, you can change the following parameters: width (discussed earlier) and smoothing.

The smoothing mode () is discussed in the description of the Brush mode.

The information on this site is intended for free study of a personal computer. You can copy and transfer materials to others.

It is prohibited to use materials for personal financial gain, or post them on websites on the Internet.

I was searching for HOW TO REMOVE WRINKLES IN PAINT. FOUND!
Usually, when boys show how to remove wrinkles from their faces, they use photos of girls, we will play with photos of men. So, go to Sumo Paint, open the photo with which we will work.
It will still be noticeable in paint, I advise you to study such a useful program as photoshop.
Paint.net graphic editor. Cloning. The clone tool is a very useful tool that will not only allow you to duplicate objects in drawings, but also delete objects, remove wrinkles and do other things.
You can paint over wrinkles. The key point of removing wrinkles in this lesson. Questions. How to remove oily shine from your face?

How to age a person's face?

Black spots on the face.
Once you feel like all the wrinkles have been removed, play with the bottom slider. For large wrinkles we use the Stamp tool, and for small ones we use the Spot Correction Tool.

Paint starts retouching the image. After that, press the Paint button. How to retouch large objects. Let's take, for example, this image. How to remove wrinkles in paint - NO MORE PROBLEM!

How to remove wrinkles using paint

The clone tool is a very useful tool that will not only allow you to duplicate objects in drawings, but also delete objects, remove wrinkles and perform other actions. Let's say we have the following fragment of a photograph and we need to remove part of the stick in front of the horse.

First, let's enlarge the photo to make it easier to work by pressing the keys Ctrl ++, that is, on the key Ctrl and, without releasing it, press the + key.

Now let's click on the duplicate button (). Two circles will appear on the screen.

The bottom circle will contain a plus sign, which indicates that the mouse cursor is located at this location. These two circles indicate that if you left-click the mouse, the background from the top circle will be moved to the bottom circle. Let's click the left mouse button for example.

The background from the upper circle will appear in place of the lower circle. Now click on the left mouse button and, without releasing it, move the cursor to the left. Then release the left mouse button and move the mouse cursor to the right, but a little lower, since in one pass we were not able to remove the stick from the drawing. And again move the mouse cursor to the right without releasing the left mouse button. As a result, part of the stick will be removed.

Now let’s enlarge the picture by pressing the keys Ctrl +-.

Part of the fence has been removed from the picture.

Now let's try to remove the blue pad on the horse's leg. Let's enlarge the photo again.

But, if we change the background, then, as can be seen from the picture, the upper circle is not on the horse’s leg. Therefore, you must first install the upper circumference on the leg. To do this, move the mouse cursor and press the key Ctrl , and without releasing it, click on the left mouse button and release it.

When a key is pressed Ctrl and pressing the left mouse button, one circle will remain on the screen. After we release the key Ctrl and the left mouse button, the circle that you selected will blink and when you move the mouse cursor, a second circle will appear.

Place the second circle at the beginning of the blue area, click on the left mouse button and, without releasing it, move the cursor down, then release the left mouse button. If the blue part appears again, then release the left mouse button and click on it again, without releasing it, move the mouse cursor even lower. We get the following picture.

Let's enlarge the picture by pressing the Ctrl + - keys.

The blue headband will mostly be removed. You can also remove the bandage on the horse's other leg.

In the same way, you can take wrinkles on the face by selecting an area where there are no wrinkles and moving them to a place where they are present.

You can also duplicate objects. Let's put two people on the horse. Let's increase the tool size to 50 points.

Then move the mouse cursor (in the form of a circle) over the rider’s face.

Press the key Ctrl to select the area that we will copy and release it. Then move the mouse cursor (second circle) to the left, where the second horsewoman should be.

Then click on the left mouse button and, without releasing it, move it down.

You can further adjust the drawing by removing breaks in the stick and foliage.

In the mode, you can change the following parameters: width (discussed earlier) and smoothing.

The smoothing mode () is discussed in the description of the Brush mode.

Portrait retouching: how to remove acne and wrinkles

To quickly remove skin imperfections, you don’t have to be an advanced Photoshop user. We present to your attention simple instructions on how to remove wrinkles and pimples from photos in Movavi Photo Editor.

The program has a whole arsenal of tools to make your skin look flawless in photographs. Let's start with retouching small pimples. To do this, we will use the “Blemish Removal” tool in the “Retouching” tab. For better removal, you need to adjust the brush size so that it is slightly larger than the editing area. In just a few clicks, our photo is already transformed.

Next, let's make the wrinkles less noticeable using the appropriate tool. This is a brush that needs to be adjusted in size, softness and intensity. By running it over the image, you will immediately notice the result: wrinkles become less deep, and small ones become practically invisible. At the same time, the naturalness of the skin is preserved, which is also important.

In this article we will tell you about some more tricks Photo editor Movavi. The first is bringing the skin to perfection. To do this, we make it matte using the “Shine Removal” and “Skin Evening” tools. When using the latter, you should not choose a large brush size and high intensity if you want your face to look natural.

The “Teeth Whitening” tool can be used for its intended purpose, or it can also be used to edit the whites of the eyes. Inappropriately reddened capillaries can also be retouched by “Removing imperfections” - which is what we did with the photo in the example. Another common defect - red eyes from the flash - can also be removed in a couple of mouse clicks.

As you can see, high-quality portrait retouching can be done at home, without resorting to complex professional programs. In addition to makeup and retouching, you can change the color scheme of the image, remove unnecessary objects from the frame, add effects, text and much more. WITH Photo editor Movavi you can easily put your photos in order.

It should also be noted that the result is quickly exported. Firstly, you can save photos in almost any format: JPEG, PNG, BMP, DPX, PCX, PBM, TIFF and others. And secondly, the edited image can be immediately uploaded to an album on Facebook, setting privacy and adding a description.

How to remove inscriptions from a picture using a graphic editor?

The situation when you need to get rid of some inscription present on the picture arises quite often. For example, you may need to remove a company logo from an advertisement, or even just the date from a photo you took yourself. You can erase an unnecessary detail using almost any of the graphics editors that exist today. So, how to remove inscriptions from a picture?

Graphic editor Paint

If the inscription is located on a plain background, you can remove it using the tools of the Paint editor. This program is available on any home computer running Windows. In order to open it, you need to click the “Start” button - “All Programs”, and then go to the “Accessories” item.

How to remove a caption from a picture in Paint?

So, you found the application and opened it. What's next? And then we open our picture by going to the main menu and clicking on the “Open” item. Select the desired image in the folder in which it is located.

You can remove an inscription in Paint by simply copying part of the background and putting a patch on it. To do this, click on the triangle under the “Select” item. From the menu that appears, select the “Rectangular Marquee” tool. Next, place the cursor, transformed into a cross, on that part of the picture where there is a background free from the image. Then hold down the mouse button (left) and select a small rectangular area. Place the cursor in the resulting rectangle, press the mouse button (right) and select “Copy” from the menu that appears.

Now click anywhere in the picture and press the right button again. In the window, select the “Insert” line. Now let's see how to remove inscriptions from a picture. To do this, drag the resulting patch onto the text by clicking on it and holding the mouse button (left). Most likely, it will not completely cover the inscription. Therefore, it will need to be stretched. To do this, place the cursor in the corner of the patch. As a result, it turns into a diagonally directed arrow. Hold down the mouse button (left) and drag the patch to the side, down or up until it grows to the required size. We adjust its position so that the inscription is completely covered.

Photoshop editor

The Photoshop graphic editor is by far the most popular of all applications designed for working with images. The widest possibilities of this program are used by both professionals (artists, photographers, etc.) and amateurs. The editor is not free. However, it is much more convenient to work with than most similar programs. With its help, you can remove unnecessary text not only from a plain background, but also from a background that is not uniform in texture.

Graphics editor Photoshop® CS5

First, let's look at how to remove a caption from a picture in Photoshop CS5. The method of getting rid of unnecessary parts of a drawing in this version is slightly different from that used in earlier versions of the program. It is somewhat easier and takes less time. We'll tell you below how to get rid of the inscription in earlier versions.

How to remove a caption in Photoshop® CS5?

Open the purchased program and click on the “File” - “Open” buttons. Select the photo that needs correction. To make it more convenient to work with the inscription, you should enlarge it. This can be done using the Loupe tool.

Now let's see how to remove inscriptions from a picture. To do this, take the Lasso or Rectangular Selection tool in the navigator and select the text. Next, on the control panel, go to the “Editing” tab and in the menu that appears, select the “Fill” line. After this, the “Fill” dialog box will appear on the screen. Here, in the “Use” area, select the “Content-aware” option. In the “Overlay” area, apply the following settings: opacity – 100%, mode – normal. Now click on the OK button. As a result of all these manipulations, the selected area will be filled with the background.

Removing captions in Photoshop® CS6

Let's look at how to remove an inscription from a picture in Photoshop CS 6. This is done in the same way as in Photoshop® CS5. We also open our picture by going to “File” - “Open”. Then copy the Background layer again and enlarge the unnecessary inscription. After this, go to the “Editing” - “Fill” section and make the necessary settings in the dialog box that appears.

How to remove inscriptions in other versions of the Photoshop editor using the Stamp tool

In earlier versions of the program, you can remove unnecessary details from a picture using the Stamp tool. This work is very simple, but requires a certain amount of accuracy. In this case, the Background layer also needs to be copied.

So, how to remove inscriptions from a picture using the Stamp tool? First, we enlarge it with the Loupe tool. Take the “Stamp” and place the circle cursor on a free area of ​​the background somewhere close to it. Hold down the Alt key and click on the selected area. In this case, the circle-cursor will decrease in size, and a cross will appear inside it. Next, move it to the inscription. Release the Alt key and click on it. As a result, part of the background will be copied over the inscription. Step by step we fill in the entire area that requires adjustment. You may have to click on the background while holding down the Alt key more than once. In this case, the end result will look much neater.

How to remove an inscription in Photoshop using the cloning method?

The cloning method in the Photoshop editor is similar to the method that we considered at the very beginning for the Paint program. The inscription is removed using the Lasso or Rectangular Marquee tool. All that is required is to select the area of ​​the background that will serve as a patch. Using the “Rectangular Area” tool, simply stretch the square in the desired area. Using Lasso you can make more complex selections. The resulting patch must be copied to a new layer. To do this, also using the “Lasso” or “Rectangular Area” tools, click on the selected area with the mouse button (right) and select the line “Copy to new layer” in the pop-up window. A new one with a patch will appear in the layers window. It will not be highlighted in the work field.

Next, take the Move tool (black arrow) and drag the patch (while on the layer with it) onto the text. In the event that it does not completely block it, you should go to the “Editing” - “Free Transformation” tab. After this, holding the mouse button (left) on one of the squares on the transformation contour, you need to stretch the patch to the required size. Next, it should be moved so that it is on top of the text, which in this case is located on a layer below. This can be done without leaving the transformation field. After the text is closed, press Enter. Thus, instead of the inscription on the picture, only a piece of the background will be visible, merging with the surroundings.

At the very last stage, you will need to merge all the layers into one. To do this, right-click anywhere in the picture and select “Merge Layers” from the menu that appears. As a result, only one Background will remain with the inscription already removed.

So, you most likely now understand how to remove the inscription from a picture. Photoshop and other graphics programs allow you to perform this operation in just a few clicks. In Paint, this can be done by selecting the patch, copying and covering the text with it. The same technique, along with the method of painting with the Stamp tool, can also be used in the Photoshop editor of earlier versions. In Photoshop, starting with version CS5, deletion is even easier - automatically, using the Content-Aware Fill tool.

">